Technology Park Architecture – The city of Itjuba is located in the southern state of the Minas Greece in Brazil, with about 5,3,3 residents. The presence of a large number of postgraduate researchers guarantees the city’s prestigious role in scientific studies around Brazil and worldwide. This city is a national recognition as one of the best university systems in the country. In addition, the city has the largest industrial area in the southern region that has large and medium sized areas, expanding many of them, giving new jobs and today they are employed by about ten thousand people. This fact contributes to Itjub by reaching the Supreme Human Development Index (HDI) Minina Gerice. Such an atmosphere is conducive to the establishment of science and technology parks – a company where the partnership between three governments, private companies and Itajuba Federal University (Uniform) will create an environmental environment for both the local and the country.
The city design, designed to emphasize the quality of the environment and landscape, will stimulate local tourism for public use, city and surroundings. The design of the city and the landscape is designed as an alternative configuration of ordinary urban business plans regarding the integration of low density and built -in environment that is intended to prefer this project. In short, the proposal of this area is the characteristics of the park, not only for the city’s expansion, and the total area of 250 years is reflected in only 67 seconds.
Technology Park Architecture
The location and location of the main occupied area of the project comes from the slope map, as the area is saved, which is more than 25%. This policy allows two vector to occupy buildings, whose project is to be preserved in the green area. Views on the surrounding landscape are also provided due to the internal configuration of the buildings, which will be the result of parameters designed to control the speed of load and use.
Project Profile: Noi Technology Park In Bolzano,…
The third vector determined by the future Itjuba City Park is explained with two of the above in the permanent defense sector. It has been suggested that the three vector’s spatial expression has been created and strengthened, which has created a large circular area, basically a great meeting point with a public place, dense injection and landscape, a factor of scientific and interesting opportunities. Given its properties, the name of Egor has been given to the public outpost in the classical city of Greece. The drainage is proposed to create a lake with an area of about 10 hectares in the flow of Josera, which is an important factor in the total landscape of the park, which can also serve as a tool for flooding and control.
The East Access Highway MG -38383 and Avida BPS access to the park from south -west to the park, which follows the Jose’s Pereira Stream Road and can drive without the flow of slots, city and university visitors. Union and buildings in Phase I are Avida BPS, and the Phase II installation site is an important component of the essential integration in the close business and educational environment.
Landscapes have been designed to ensure communication between local landscapes and urban areas, which are mainly referred to as a new lake. In urban planning, the registration of the roads is containing the theme, that is, each road is associated with a specific local tree species. Perennial species that require low water for irrigation are the most used for durable landscapes and maintenance savings. Augor is placed on the landscape design, which acts as a park articulator, and there will be space for events, relaxation and reflection. In addition, the user qualifies for the inclusion of many devices that improve the better improvement (steps, tables, vase, lighting).
The three new buildings of the building were designed in addition to the city’s design: administrative building, laboratory center and maintenance center. Some of the most common features for these three buildings are the industrial building systems (especially in modular folding concrete), the use and control of natural ventilation and lighting as well as prismatic volume where the consistency of large openings during architectural space and landscape.
Hkstp Supports Lok Ma Chau Loop Development For Hong Kong/shenzhen Innovation
The sector of use in the administrative building has been installed at two main levels, by preferring the ground floor, separate volume and interior. The administrative space is occupied by a long linear block on the “pilot”. In this way, the human environment is provided at different levels of environment, while the administrative suspended block emphasizes the image of a strong organization.
The laboratory center is determined by many activities done by companies involved. Architectural design reacts to it with dynamic structure. Adopting the organic business principle on the local grid is related to the modular adaptation that such a company needs.
The maintenance center includes technical activities when collecting rooms dedicated to the good and socialization of PCTI employees. The building consists of three blocks separated by two internal yards. However, each section has a clear autonomy, and the building is described as a single volume with a large opening in the tip and in the yard. The PEPI district development area of Jhangsu province of Ziangsu province, science and technology park is aimed at becoming a creative, creative, creative design area of research, innovation, innovation and production. This development is in accordance with the strongest standard requirements of the German green building, this development is the Green Building Project of the PEI County Pilot and will be the first certified DGNB City Quarter in China after completion.
Architectural design includes 6 small -scientific and technology incubator office buildings and scientific and technology exhibition pavilions in the support service sector with total construction sector of 26800 square meters. The section of the buildings follows the semicircular shape of the story with the small office units around the display hall in the center.
Science And Technology Park
The science and technology park will be used mostly that day. For this reason, the face design not only matches the orientation of the office units, but also changes slowly on each side, opens wider and more frequently in the north, and starts less frequently to the south.
The main aspect of the face design that promotes low terminal heating/cooling is the careful place of opening between the outer and rigid walls, careful placement of the opening and the efficient sun. When the sunblock is considered, these three main features are used: the grade of the upper and bottom of each window frustrated glazing; Perforated panels that cover completely open; Vertical perforated feathers on the side of the windows. Depending on the orientation of the office building, a combination of these three components is presented differently.
The exhibition center is designed to temporarily perform by technology companies working in the neighborhood. It is in the semicircle in the center of the story with its outer half open main road and a waterfront park, while the inside of its circular has to face six incubator buildings. To improve its public character, the diagonally green roof occupies the entire building and is constantly connected to the base floor, allowing people to access the second floor cafe. The polish green roof also facilitates the position and efficiency of a larger set of photlelectric panels.
As an incubator, the face of the exhibition center is designed after orientation. In the summer, the sun is reduced by the shadow of the high effective sun; The remaining sunlight is directly absorbed with a cooling surface to prevent heat distribution in the building. The slabs on the floor are cooled with an integrated pipe system up to 20 ° C. Relatively high temperatures are guaranteed that condensation does not occur. The only business area (3m) ventilation of displacement from the floor and walls to cool and cool down. In winter, the plates on the active floor are heated with up to 30 ° C with pipeline systems. The park includes communal public spaces that combine the cultically culture, entertainment and green equipped buildings and public parks to local nature. The design of the competition is divided into four places of 10,000 m2 2 public areas, 56,000 m 2 public parks and 37,000 m 2 buildings: library, art
Nanjing Hongfeng Technology Park, Building A1 / One Design
Enterprise technology architecture, technology architecture diagram, architecture technology course, technology in architecture, architecture technology degree, technology architecture principles, cloud technology architecture, architecture technology, information technology enterprise architecture, architecture design technology, information technology architecture, togaf technology architecture
